Home / Products
Unfired Steam Generators to generate steam 40 psig or greater will be 100% X-Rayed and heat treated in accordance the ASME code. Stainless Steel Construction. CEMLINE Unfired Steam Generators can be constructed of stainless steel when no condensate is returned and there is 100% make up, such as in steam humidification.
A boiler or steam generator is a device used to create steam by applying heat energy to water.Although the definitions are somewhat flexible, it can be said that older steam generators were commonly termed boilers and worked at low to medium pressure (7–2,000 kPa or 1–290 psi) but, at pressures above this, it is more usual to speak of a steam generator.
1.2.1 RATED PRESSURE AND TEMPERATURE. The boiler shall be specified for the maximum operating steam pressure required at the superheater outlet for operation of the turbine generator. The specified operating pressure is the maximum operating pressure at the turbine throttle valve inlet plus the main steam line pressure drop
If the plant has only one steam generator (boiler), uses a single fuel, and has a single steam pressure level, it is relatively easy to assign a cost to the steam. However, in most cases, there are multiple steam sources and multiple fuels. There are also multiple steam pressure levels with multiple paths by which the steam pressure is reduced
Steam generators Generation of steam for heating, atomizing oil burners, and process. Use fouling factor of 0.0001 on steam side. Temp. difference between leaving HTW and steam temp. should not be less than 30 °F to 40 °F. Vapor disengaging velocity under 3 ft/sec. Table 2 (continued). 3.1.2 FORCED CIRCULATION HOT WATER GENERATORS, SEPARATE
Steam-Flo ® Low Pressure Steam Generator The Sioux Steam-Flo ® steam generator is a perfect source of low pressure steam for a variety of commercial and industrial applications. This unit can be used in place of a conventional boiler. These industrial steam generators produce from 370-3,450 lbs. (168-1,564 kg) per hour of saturated steam in minutes.
The steam cost example outline below assumes use of one steam generator (boiler), a single fuel, and one steam pressure. The unloaded steam cost example calculation factors in deaerator feedwater Btu content, which does not consider make-up water or condensate return. Also, the calculation uses only one boiler efficiency.
Jan 01, 2013· The ASME Boiler and Pressure Vessel Code (ASME BPVC), which is administered by ASME (New York, N.Y.; www.asme.org; founded as the American Society of Mechanical Engineers), is a well-established standard for the design and fabrication of boilers and pressure vessels.ASME code-symbol stamps show compliance with the requirements of the standard, but code stamping of steam …
high pressure steam produced by . a boiler or heat recovery steam generator (HRSG). Unlike gas turbines or microturbines, steam turbines do not directly consume fuel. Rather, the fuel driving the process is the fired boiler or plant equipment that produces heat for the HRSG (e.g., a gas turbine). Table 1. Summary of Steam Turbine Attributes for CHP
The ORC turbogenerator uses medium-to-high-temperature thermal oil to preheat and vaporize a suitable organic working fluid in the evaporator (4>5). The organic fluid vapor rotates the turbine (5>6), which is directly coupled to the electric generator, resulting in clean, reliable electric power.
Online calculator to quickly determine Steam Unit Cost. Includes 53 different calculations. Equations displayed for easy reference.